What's new

Got Chankast running, but the video appears with no text visable on the boot screen?

smc999

New member
Hi,
I have installed Chankast with all the relevant bios files etc and have the newest drivers for my video card.
I am using the following

Nvidia Riva TNT2 model 64 (using April 2004 driver. Newest).
AMD Athlon 2400 XP+
256 meg Sdram
Asrock k7 motherboard

Running Chankast alpha02a (have tried alpha02 also, with the same problem)

The emulator starts, but the display is grey and dark blocks move around as it boots (I assume this is the swirl?). It then goes into the main DC display (controller, Memory card etc). The strange thing is that no text is visible on the screen. When I try and mount images or run a disc I get an error message but again there is no text, which doesn't really help.
If anyone knows how to make the emu display correctly with text, could you let me know.
Thanks in advance
Steve
 

Clements

Active member
Moderator
I suspect that your video card is far too old for the graphics to be displayed correctly. Since the rest of your system is fine, I'd suggest a video card upgrade.
 
OP
S

smc999

New member
Has anyone else managed to get this videocard to run Chankast?
Hope I haven't got to buy a new card. I am getting some more memory next.
I can play other games perfectly with this card.
 

PsyMan

Just Another Wacko ;)
You may consider installing the latest BETA drivers for your video card from http://www.guru3d.com
Also make sure that you have DirectX 9b installed. If this doesn't work then you have to upgrade your video card.
 
OP
S

smc999

New member
Thanks for the ray of hope!
Will give it a try when i get in from work tonight.
I will let you know how I get on.
Much appreciated.
 
OP
S

smc999

New member
No I am on 2000, but the new version says Chankast is compatible.
I will try the new driver.
Would Xp make that much difference?
My pc doesn't seem to like XP when I have installed it previously.
 

PsyMan

Just Another Wacko ;)
Well, running Chankast under Windows 2000 is a tricky procedure. You may not be able to run games with it. In that case search the forums and you may find a solution; If not, wait for the next release which will be fully compatible with Windows 2000.
 
Last edited:

jmosher

New member
I read the top post where you said you get an error when you try to run a CD or game. What is that error message?

----
RTFM - What does that mean??
 

refraction

PCSX2 Coder
People need to learn to read the FAQ, if you have a problem read that, instead of making pointless posts asking why your obsolete hardware doesnt work.

if your not up to specs i suggest an update, you could build a whole pc up to minimum specs for under 200 dollars.

Athlon XP chip (if you dont have one) can be found for < $50
low end Geforce or low end Radeon < $50

its not much to spend is it?
 
OP
S

smc999

New member
refraction said:
People need to learn to read the FAQ, if you have a problem read that, instead of making pointless posts asking why your obsolete hardware doesnt work.

if your not up to specs i suggest an update, you could build a whole pc up to minimum specs for under 200 dollars.

Athlon XP chip (if you dont have one) can be found for < $50
low end Geforce or low end Radeon < $50

its not much to spend is it?

First off I can't see the text, so i don't know what the error message is. :p

As for Refraction. Nice agressive tone you have there. I have read the FAQ and found nothing regarding a problem like this. As for pricing, you are in the UK so why quote prices in dollars? If I need a new graphics card, fair enough, but you tell me where you get a Geforce for £25????
I asked a perfectly reasonable question. Take a day off from being a dick. :bye3:
 

PsyMan

Just Another Wacko ;)
Hey, watch your mouth! Since you can't see what the error is, it's probably an error from dreamcast itself (not the emulator) that tells you to insert a CD-ROM in the dreamcast drive (common problem with non-bootable disks or Windows 2000 incompatibility). refraction was right, go to a shop with used PC hardware parts and you can find a GeForce 2 for a very small amount of money.

EDIT: "RTFM" means "read the manual".
 
Last edited:
OP
S

smc999

New member
PsyMan said:
Hey, watch your mouth! Since you can't see what the error is, it's probably an error from dreamcast itself (not the emulator) that tells you to insert a CD-ROM in the dreamcast drive (common problem with non-bootable disks or Windows 2000 incompatibility). refraction was right, go to a shop with used PC hardware parts and you can find a GeForce 2 for a very small amount of money.

EDIT: "RTFM" means "read the manual".

Sorry about the language.
Thanks for the info about the new card.
I don't really keep up to date with what is outdated etc. I just asked a question and got a bullish response from Refraction.
Thanks for the help guys.
 

refraction

PCSX2 Coder
sorry for sounding a bit harsh about it all but a lot of people post problems on here on why chankast isnt working for them when something on their system is obviously under specs, you can pick up hardware that will work reasonably cheap these days, so it would be an idea to spend a few pennies on it :)
 
OP
S

smc999

New member
refraction said:
sorry for sounding a bit harsh about it all but a lot of people post problems on here on why chankast isnt working for them when something on their system is obviously under specs, you can pick up hardware that will work reasonably cheap these days, so it would be an idea to spend a few pennies on it :)


No problem. Sorry for going off at the deep end. Only had 5 hours sleep due to trying to get Chankast to work! :blush:

Hope you except my apology.
Looks like I might be looking for a newcard, if installing XP doesn't work. :bouncy:
 

Top