RJARRRPCGP
The Rocking PC Wiz
Gee wiz, I doubt that will be possible with air cooling 
.
.OMG, an Athlon XP overclocked to 3 ghz!!!
- Thread starter RJARRRPCGP
- Start date
OP
RJARRRPCGP
The Rocking PC Wiz
- Thread Starter
- #3
Yes, better believe it, that dude probably has some MAJOR money .
.
Jigga0o7
Overclocking Junkie
H3ad5h0tter said:Wow , that guy must've lots of money or rich parents ! A standard vaporisator cooling costs about 1000€ :O . And the Hardware about 2000€ .
I don't think it will run that good...
You know this is B/S right? I really hope so. -274C? I think not. Here goes some of the real deal. LN2 cooling, -196C. Check out the clocks on the video card too, and 14 120mm fans? This guy's gotta be joking or something.
http://www.vr-zone.com/ocdb/amd_screenshots/167i.gif
Last edited:
-Shadow-
Banned
Jigga0o7 said:
Huh ? Whats B/S ? I only know Vapochill , it makes the CPU around -200°C cold or something ( vaporisator )
Ok , i even think he's faking a little bit , because i've NEVER seen liquid nitrogen cooling for ram
Ah , i just seen hes got a custom mod for the Mobo + Modded nitrogen cooling , but 14 120cm fans ?! He's got even his own CASE ?! I know that pic . I saw it on a japanese Overclocking site . It's very nice work , i really appreciate it
Hehe , try it with this air "cooling"RJABLABLA said:
( warning , joke )
Last edited:
Er...
Given that -273.15 degrees C is absolute zero, his processor cannot possibly be -274. Unless his PC defies the laws of physics.
...and think out it - liquid hydrogen. Do you know how dangerous that is? That is rocket fuel. If he was better at making stuff up, he would at least say he was using liquid helium.
Given that -273.15 degrees C is absolute zero, his processor cannot possibly be -274. Unless his PC defies the laws of physics.
...and think out it - liquid hydrogen. Do you know how dangerous that is? That is rocket fuel. If he was better at making stuff up, he would at least say he was using liquid helium.
Dysprosium
Graphics Designer
Clements said:
Yeah.. a lot of the stuff he put there isn't logical. I mean, there's not a computer in the world that can use Liquid Hydrogen, is there? Let alone the degrees.
( As Clements mentioned. )
Burnpro
Supar ***
13xxx in 3dmark03 wiith a fx 5950????? that is a real joke.., someone before the new line graphic cards (x800,6800) broke 10,000 points in 3dmark03 with masive cooling and overclocking and with the fastest card in the momment (9800xt) and if i remember correctly he was using a 4.x GHZ cpu too.
and look at this:
http://www6.tomshardware.com/cpu/20031230/index.html
-196C with liquid nitrogen,
so once more he is BSing
and look at this:
http://www6.tomshardware.com/cpu/20031230/index.html
-196C with liquid nitrogen,
so once more he is BSing
refraction
PCSX2 Coder
H3ad5h0tter said:
actually we have a vapochill in the house, it does up to a max of -50c, but with the pc running you get between -10c and +11c
I doubt he has liquid nitrogen cooling, cos hed have ice growing on the back of his motherboard which in turn would short the thing out, i think he talks bollocks tbh
altho that probably is possible, i mean ive seen a 486 SX 25 running at 2ghz with LN2 cooling, even tho it was only for 15 seconds before it fried
Jigga0o7
Overclocking Junkie
Stezo2k said:you might be right, that screenshot is a nice overclock though
3.5 ghz, thats gotta be at least a 4200+ PR rating
3578mhz on an AXP is farrr more than a 4200+ rating. A chip around 3.6ghz would get a 4650+ rating.
2.2 = 3200+
2.4 = 3400+
2.6 = 3600+
2.8 = 3800+
3.0 = 4000+
3.2 = 4200+
3.4 = 4400+
3.6 = 4600+
Take FSB into account. And thats all according to AMD's PR ratings which are bollocks IMO.
And I was going to say the temp is impossible according to physics but I forgot the numbers where absolute 0 started.
And I wish vapochill would get -200C. The newest Vapochills can get about -70C or so, and like -80C if you mod them with different gasses. You'd have to build a cascade machine if you'd want something to take it to -100C and beyond.
Last edited:
Jigga0o7
Overclocking Junkie
Stezo2k said:cheers for the info mate, sounds good
as for the vapochills, any idea how much they are? will want to purchase one if the price is right
Well now that nVentiv *maker of Prommetia's* is out of buisness, the price of vapochills are probably going to increase. I went looking around for prices since I might get one next month, and for the top of the line Vapochill AC its like $900 or so. I'd like to get a lower, older version and see if I can get it for around $500-600. Either that or i'm water coolin. I don't really care.
