What's new

Still Struggling with DOA2LE

Shinobi909

New member
I followed the steps outlined by Freeman on this thread, And have previously tried before without sucess:

http://www.emutalk.net/chankast/21687-dead-alive-limited-edition-don-t-work.html

Freeman said:
1. Get the FASTBOOT program from here: http://www.ngemu.com/forums/attachme...chmentid=71234

2. Get these 2 files rared: http://www.emutalk.net/attachment.ph...chmentid=16850

3. Put those files inside the FASTBOOT main folder.

4. Mount the DOA2 image with daemon tools, or any other virtual drive you have, and copy the entire content of the CD to the DATA sub-folder inside de FASTBOOT folder, with the exception of the 1st_read.bin, and the DUMMY file, which should be like 200/300mb.

5. Double click on the BINHACK program, and when it prompts to input the binary file, type 1ST_READ.BIN , the bootsector IP.BIN, and the MSINFO VALUE is 0,0 (that is zero comma zero).

6. Then, put the 1st_read and ip.bin into de DATA subfolder.

7. double click on b2b_game , and wait till it finishes.

8. You yourself an image.

9. Mount it with your virtual drive. If it doesnt work, install daemon-tools 3.29 from here: http://www.daemon-tools.cc/dtcc/port...tegory&catid=8

I still can't get it to work. I tried mounting it in the lastest version of deamon tools and it didn't work, I can't use version 3.29 becuase it crashes my computer during installation. (I don't have EasyCD installed.) I tried using alcohol120 and it does the same thing as the lastest daemontools, it comes up with an error message saying "ioControl Error" and the emu crashes. What else is there to do?

Edit: Just tried exploring the image fastboot gave me when it had finished, and it says "Windows cannot read from the disk. It may corrupted or using a format that is incompatible with windows."
 
Last edited:

madh83

New member
yea i had the same problem, there's no real way around it unfortunately...until someone makes a 3.47 readable image of the game
 

GD666

New member
I also had this problem but I somehow managed to install Daemon tools just try and try it works fine when the installation is completed after 4-5 reboots
and DOA2LE works with RED Swirl BIOS of DC but not with the Blue swirl bios for me.... strange:plain:
 
OP
Shinobi909

Shinobi909

New member
It's Ok now. I was lucky enough to find a version that had already been edited. Boots in Alcohol as well.
 

Top