DOA2 LE does not work

[DrIdiot]

DOA2 LE does not work.

After the DreamCast screen, it goes blank and crashes

There is a 1ST_BOOT.BIN file on the CD but no IP.BIN, im not sure why. is that right?

I mounted the CD with Alcohol 120%.

Does anyone know a fix for this?

I tried the method here:

http://emutalk.net/showthread.php?t=21191&page=3&pp=15

But the CDI does not work. When I mount it, it says its corrupted, and theres an io error in chanka when i try to run it.

 

[Ly Mathews]

Follow these steps, originally posted by the user TheFreeman:

Its really easy, and you dont even have to waste CDs.

1. Get the FASTBOOT program from here:
http://www.ngemu.com/forums/attachment.php?attachmentid=71234
2. Get these 2 files rared: http://www.emutalk.net/attachment.php?attachmentid=16850

3. Put those files inside the FASTBOOT main folder.

4. Mount the DOA2 image with daemon tools, or any other virtual drive you have, and copy the entire content of the CD to the DATA sub-folder inside de FASTBOOT folder, with the exception of the 1st_read.bin, and the DUMMY file, which should be like 200/300mb.

5. Double click on the BINHACK program, and when it prompts to input the binary file, type 1ST_READ.BIN , the bootsector IP.BIN, and the MSINFO VALUE is 0,0 (that is zero comma zero).

6. Then, put the 1st_read and ip.bin into de DATA subfolder.

7. double click on b2b_game , and wait till it finishes.

8. You yourself an image.

9. Mount it with your virtual drive. If it doesnt work, install daemon-tools 3.29 from here: http://www.daemon-tools.cc/dtcc/portal/download.php?mode=ViewCategory&catid=8

If you aren't logged in at ngemu you can catch the FASTBOOT program in the attachment.

 

[DrIdiot]

thanks a lot! it worked! i think my ip.bin file was bad.

uh, i have another problem though, the controls won't work. i tried all three different plugins

I have a USB keyboard, I dunno if that has to do with it. I doubt it, since I Could configure my controls
and uh, it's not game-related, since the BIOS screen won't take the controls either.

the controls work in Chankast 0.2a but not 0.25a

edit: I fixed it by reinstallig. Thanks!