N64+PSX USB Converter Problem!!!!

**Ryoko** · March 7th, 2002, 01:00

Me and a few friends have just bought the BOOM N64+PSX USB CONVERTER for the PC. (from www.lik-sang.com)

It states that you can use an N64 or PSX/PS2 controller on your PC.
I can set up the PS2 controller with no bother, but when I try to set up the N64....it acts like the buttons are being pressed down automatically and skips through the calibration section.

Have tried the other converters on my PC and others with no luck.
Tried other drivers and operating systems...but to no avail.

Tried to contact the makers (on numerous occasions)..but has been about 3 weeks with no reply...

Has anyone else got an N64 controller to work...if so can you please help me.

???

**Ogy** · March 7th, 2002, 01:10

can you please tell me the trick to get 20gb+20gb+30gb to 90gb??

and those AMD XP's are crappier then i thought if they only run @1.44Mhz

p.s. hope your not mad i'm trying to correct you.

i have an Adaptoid and it works fine so, can't help you sorry.

**Ryoko** · March 7th, 2002, 01:24

Thanx for correction points.......I didn't noticed that at all...well spotted.

Any chance of sending me the drivers you used.....

Can't get it to work at all....tried alot of stuff

**Ogy** · March 7th, 2002, 01:45

umm.. do you have an adaptoid ?

**Ryoko** · March 7th, 2002, 01:51

No....its the joint N64 & PSX/PS2 converter

http://www.lik-sang.com/catalog/prod...roducts_id=93&

**Mr. Frisbee III** · March 7th, 2002, 02:04

Are you using an official Nintendo controller? I have an Adaptoid, but have found unofficial ones to perform strangely. The fact that the PlayStation controller works might point to a problem with your N64 pad...or drivers

**Ogy** · March 7th, 2002, 02:06

err.. then you have nothing to do with the Adaptiod drivers.

i have a question, are you using N-Rage plugin's LATEST version?
oh .. and what is your DircetX ver?

**Mr. Frisbee III** · March 7th, 2002, 02:07

oooooooooo....if you are using an unofficial one, then maybe those funny turbo/autofire switches that seem to be on most unofficial pads are autofiring through the set-up. make sure they are off!

**flow``** · March 7th, 2002, 02:17

Ryoko: try re-installing the drivers maybe?

i noticed the date on the drivers was 99?

what OS are you on?

**Ryoko** · March 7th, 2002, 02:17

I have tried an Official and non one......

Can't even configure the pad in PJ64 because of the strange configuration in the windows GAME CONTROLLERS section.

I have direct X 8.1 aw well.

Thread: N64+PSX USB Converter Problem!!!!

Thread Tools

Display

N64+PSX USB Converter Problem!!!!

Posting Permissions