Controller Setup (N64)

[jmf145]

for those of you that have a dual shock controller this is my preferred setup:

http://x11.putfile.com/3/7515173086.jpg

and for you who are using a key board this is a good a setup

http://x11.putfile.com/3/7517323390.jpg


~JmF145~

[Milkrosoft]

How do you assign save and restore to the controller? Are you using PJ64?

[jmf145]

yeh im using pj64 and its F5 to save state and F7 to load

and the programe for the controller is here:

http://www.logitech.com/index.cfm/downloads/software/US/EN,CRID=1784,contentid=7307

[masvil2]

jmf145, I have 3 questions for you:

- are you using "3" and "4" buttons (if so, how?) or F5 and F7?

- I'm using a similar Logitech controller (http://www.logitech.com/index.cfm/products/details/US/EN,CRID=2225,CONTENTID=8674)
at which percentage have you setted analog stick range?

- why have you associated analog stick with digital stick and viceversa?

[jmf145]

im using 3 and 4 buttons witch push F5 and F7

i set the analog stick to 100%

and the reson the analog stick and the d-pad are swiched is because the emulater does not work with analog so it does not matter if its a analog stick or a d-pad (plus it makes it easier to play)

[masvil2]

im using 3 and 4 buttons witch push F5 and F7
How can you set so?

i set the analog stick to 100%
Why have you changed default? Any advantage?

and the reson the analog stick and the d-pad are swiched is because the emulater does not work with analog
Strage, here analogic works well (tested with Mario Kart 64 on pj64 and Logitech Rumble 2)!