[$threadinfo[title]]

[Lord Cheese]

Don't get your hopes up, its not that big a deal. Not much work has been done on
it save a new GUI and some 3d graphics support. Releasing test versions will make
me aware of bugs, what is/isn't working and also tips/ideas from testers. Hopefully
new test releases will be made available on a bi-weekly basis which will show alot
of improvement. I havn't had lots of time to devote to Dreamemu in the past hence the
slow progress. Hopefully this will make me spend some more time working on it. For more details, please read the <A href="http://www.dreamemu.net">news<a/>. This will also give details on the new email addresses and also the new compatibility list and report section.

Download it <A href="http://www.dreamemu.net/files/dreamemu-0.0.4.1-bin-rel.zip">here</A>!

[Falcon4ever]

hmm it isn't save-ing the plugin path and bios path.
(so when i restart it, it give some errors)

and where can i find the IP.BINs and 1ST_READ.BINs/Bootfiles ?

(using win98se)

[Lord Cheese]

ip.bin isnt the bios, and u can find them in any of the demos you download. thats a wierd problem with the plugin paths, probably got to do with the registry - im using winxp so there could be differences. Could u mail me the error messages and stuff to bugs@dreamemu.net? tnx.

[mmcoder]

"No attachment specified. If you followed a valid link, please notify the webmaster"

[mmcoder]

oh, the link in this thread works

[CoDeX]

When you form the DreamEmu and restart the emulator, it shows you many messages of ERROR and when you initiate emulation STARS DEMO also

[Lord Cheese]

Please be more specific. I released it because I am getting no errors at all now, but I know how to use it so I might be assuming something.

[(*_*)MARK]

maybe it doesnt cause errors on xp but I get the same error about bios file not being there and the plugin, even when I have the katana.bin ting (Winme)

[RuLaX]

The same error again and again:
SH-4 Error

Uhandle instruction H´009B H´AC010000

And not save the path.

win98SE
celeron 450
96 Mb RAM

Good work
:satisfied

[Lord Cheese]

The sh4 error is most likly a scrambling problem. the plugin paths and bios are a win98 thing, ill get it sorted as soon as possible.

[Pr()ZaC]

I just would like to congratulate you, Lord Cheese, for your efforts devoted to the Dreamcast emulation community.
I hope we soon will enjoy Dead or Alive 2 in our humble PCs ;)

[(*_*)MARK]

:sleepy: ........err right.:plain2:

[BinoX]

I'm gunna be uploading demos and things to my site soon as I test them and make sure they work fine.

I'll have zips and isos there of all of them...

I'll do it this weekend.

[CoDeX]

The messages of mistake that shows me in the Windows 98 on having restarted the DreamEmu after having config it, They Are:

1
------------------------------------------------------------------------------------
Plugin Error
A file could not be opened (File not found/invalid format) (input - "C:\DreamEmu\Plugins\LordCheese_DirectDra w7.dll")

2
------------------------------------------------------------------------------------
BIOS Error
A file could not be opened (File not found/invalid format) (input - " ")

:(

[Lord Cheese]

it looks likeim going to have to install win98 to test it. there is something wierd going on wth the registry.

[TOPKat]

Hi all, well, Ive just found this segaall.bim 4MB file, but when I try to run it with the emu it just doesnt work. Ive rename it to bios.bin and tryed to set it in the config menus but, it just dont let me. Wots the name of the bios, and is this file Ive found the right one??? thx

[CpU MasteR]

Originally posted by TOPKat
Hi all, well, Ive just found this segaall.bim 4MB file, but when I try to run it with the emu it just doesnt work. Ive rename it to bios.bin and tryed to set it in the config menus but, it just dont let me. Wots the name of the bios, and is this file Ive found the right one??? thx

Why bother, it doesnt even run yet...

[Marty]

Originally posted by TOPKat
Hi all, well, Ive just found this segaall.bim 4MB file, but when I try to run it with the emu it just doesnt work. Ive rename it to bios.bin and tryed to set it in the config menus but, it just dont let me. Wots the name of the bios, and is this file Ive found the right one??? thx

So, I find this file too! TOPkat, is that bios or fake?
People, what this file means?

[Marty]

Originally posted by TOPKat
Hi all, well, Ive just found this segaall.bim 4MB file, but when I try to run it with the emu it just doesnt work. Ive rename it to bios.bin and tryed to set it in the config menus but, it just dont let me. Wots the name of the bios, and is this file Ive found the right one??? thx

So, I find this file too! TOPkat, is that bios or it's fake?
People, what this file means?

[Flash]

I've got two 4Meg DC BIOS files: first was
ordinary bad dump and i've launched it to the hyperspace through /dev/null :)

Second is some kind of BIOS from WIP version of DC hardware with some debugger stuff inside. Not it's not devstation BIOS, it's BIOS from early internal
revision of DC.

It will not work with Dreamemu, Icarus or even (unmodified) DC

Good DC BIOS is 2Mb. (Megs here is megabytes, not megabits)

[Marty]

Do you have bios? Yes or not! :saint:

[Marty]

FLASH!

[Marty]

Originally posted by Flash
I've got two 4Meg DC BIOS files: first was
ordinary bad dump and i've launched it to the hyperspace through /dev/null :)

Second is some kind of BIOS from WIP version of DC hardware with some debugger stuff inside. Not it's not devstation BIOS, it's BIOS from early internal
revision of DC.

It will not work with Dreamemu, Icarus or even (unmodified) DC

Good DC BIOS is 2Mb. (Megs here is megabytes, not megabits)

Flash, imeet li smysl prosit' tebya vyslat' mne bios?
My Asya: 124053423
Can I say, PLEASE!
I have Dreamcast, but I don't have some cable, needed for connecet to PC. :cry:

[joe_blow_22]

Is this bios necessary to run the emulator, I downloaded marvel vs capcom 2 and the dreamemu 0.0.4.1, I burnt the imiage to a disk, set all the directorys and when I try to start the emulation I get

SH-4 Error
unhandled instruction H'4089 at H'AC010042

I read about people downloading bios's and searched and found 2 different ones but only 32kb, I opened them in a text editor and did see some sega logo junk, I am using windows xp without sp1 amd 1800xp, 768megs ddr, and ati radeon 9600pro 128 video card at 16 million colors. Am I just missing something, is this game not compatable or do I need a bios? I game does have all the files it asks for like ip.bin and first read or whatever.

[Trotterwatch]

It isn't compatible, nor are any other games.

[aprentice]

it sux...



just kidding! great to see you figured out you can code and leech at the same time :)

[ARTH]

Commercial games doesn't work, but I'm still waiting ;) .

[theregos]

Well I get the same error messages when I load up the emulator, and I've found that it doesn't write the settings to the ini file which is in the same folder...that's why I keep getting the messages :-S

Any help with this?

[Evangelis_Uk]

Is It Possible For Some Kind person to send me a bios for this either via pm or sending me a link? Much appreciated!

[Martin]

Is It Possible For Some Kind person to send me a bios for this either via pm or sending me a link? Much appreciated!
You're a fool, good bye.

[XAlucardX]

I wanna give a big hand for the Chanka Team and the work they've done so far, I've can only imagine the amount of hours, headaches and efforts that have been put out. Once again EXCELLENT JOB!!! and KEEP UP THE GREAT WORK :D


-Alucard-

[zaba_3]

ehh wrong forum

[abba]

they are one faimly