NJPW4 Selfboot Troubles!

[JKidd]

Ok i made this game selfbootable but it had no ip.bin or 1st_readme.bin so i took them from a different game.But when i load the game it brings me to the bios page with the clock, game controler etc. anyways i went to start the game, but all it does is restart with the sega load screen and back to the bios.Do i need to have 1st_readme for this game, i cant use the 1st_readme from a different game?Is this the problem cause it dosent have the 1st reame, cause i looked for another file in the image but there is no othe bin files.

[cog1]

i'll try to explain that,but my English is poor...so try to understand my words.

At first you need a software named cdrwin4.0.Run it,enter"Table of Contents"panel,try to find the start address of the second session(11700 or 11702 for
most game)

on the assumption that your result is:
track LBA
02 11700

Then enter "Extract Disc/Track/Sectors"
-Select"Select Sectors"
-Select Datatype ： normally Data Mode2Form1 2048
-The size of ip.bin will be 32kb
-Fill 11700-11715(16 sectors) in the blank of Sector Selection
-Save as ip.bin
-Press start button
You'll get your ip.bin file.Open it with your notepad,the first line will be like this:
SEGA SEGAKATANA SEGA ENTERPRISESA6F9 CD-ROM1/1 JUE E799F10 T0000 V1.00120010206 XXXXXX.BIN ECHELON Flash Internet Settings Adjuster

the XXXXX.BIN is the 1ST_READ.BIN of this game,acting this file as it was 1ST_READ.BIN .

[OzTm]

cog1: Yes, but he says that there are no other .bin files on the CD. Maybe it's a bad image. Does it work on a real DC?
And yes, JKidd, you do need a separate bin file for each game, you cannot swap them around.

[JKidd]

i think it is bad image oh well thanx anyways